Canon MF4500 Series Service Manual page 125

4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the SADF Pickup Roller
4) Remove the gear [1].
• 1 claw [2]
5) Remove the 2 e-rings [1] and the bushing [2], and then move the bushing [3].
[3]
4 Disassembly/Assembly > Document Exposure/Feeder System > Removing the SADF Pickup Roller
[1]
[2]
F-4-129
[1]
[2]
F-4-130
6) Lift the SADF pickup roller shaft [1] and remove the SADF pickup roller [2].
Caution:
Align the protruding part [A] of the bushing to the cut-out [B] of the shaft support to
mount the bushing.
[A]
4-62
[2]
[1]
F-4-131
[B]
[A]
F-4-132
4-62