Before Removing The Dadf Unit; Removing The Dadf Unit - Canon MF4500 Series Service Manual

4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the DADF Unit
Caution:
When mounting the DADF unit and reader unit, fix the 2 hinge arm claws [1] to the 2
latches [2] in the reader unit.
[1]
[2]
[1]
[2]
4 Disassembly/Assembly > Document Exposure/Feeder System > Removing the DADF Unit

Before Removing the DADF Unit

1) Remove the left cover. (Duplex models) (Refer to page 4-31)
2) Remove the DADF unit and reader unit. (Refer to page 4-40)

Removing the DADF Unit

Caution:
Place the detached DADF unit to avoid damaging the bottom sheet.
1) Remove the connector cover [1].
• 4 claws [2]
Note:
The locations of the 4 connector cover claws [2] are shown here.
F-4-72
[2]
[2]
F-4-73
4-42
4-42