3.5 When do I need to use the transmitter?
The receiver can be used with or without the transmitter.
The table below illustrates the capabilities of the receiver when used with and without the
transmitter.
Signal detection mode
Radio
Power Grid
Transmitter
a.
An estimate of depth is available in this mode (by manual measurement), however automatic and more
accurate depth measurement can be obtained when using the receiver in 'Transmitter' mode together with
the transmitter.
Receiver (Rx)
Locates
Electrical
Metallic
Cables
Pipes
Measures
depth
Non-metallic
pipes
a
a
R
G
ETTING STARTED
Transmitter (Tx)
Is it used?
7