Customer Data Center Connection: Lag Direct Link - Lenovo ThinkAgile CP Series Hardware Installation Manual

Hide thumbs Also See for ThinkAgile CP Series:
Table of Contents

Advertisement

Link Aggregation Group (LAG) direct link topology
This section covers details about the Link Aggregation Group (LAG) direct link topology.
Based on the LAG direct link topology and the uplink bandwidth option (10 Gbps or 40 Gbps) for the
customer data center connection, use the following port connectivity diagram:
Figure 35. Customer data center connection: LAG direct link
Notes:
• The interconnect switch requires a single 1 Gbps copper connection (RJ45) from the out-of-band (OOB)
management port on the interconnect switch to the management switch or the OOB interconnect
network.
• Ports 51 and 54 of the interconnect switch do not have LED status indicators.
The following table provides the ports from the interconnect switch which need to be connected to the
customer data center network.
Uplink bandwidth option
10 Gbps data center network
40 Gbps data center network
Note: Choose either the 10 Gbps or the 40 Gbps option.
54
Lenovo ThinkAgile CP Hardware Installation Guide
Device
Primary device
Secondary device
Primary device
Secondary device
Network interconnect ports
Interconnect, Mgmt port
Interconnect, port 48
Interconnec,t port 46
Interconnect, Mgmt port
Interconnect, port 54
Interconnect, port 53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkagile cp6000Thinkagile cp4000

Table of Contents