Table of Contents
Advertisement
Install the compute slide rails
Procedures for installing ThinkAgile CP compute block slide rails in a rack.
The slide rails are extensible as shown in the following illustration:
Figure 17. Slide rails
To install the ThinkAgile CP compute block slide rails, do the following:
Step 1.
Ensure that the slide rail is shortened to its shortest position.
Step 2.
From the front of the rack cabinet, line up the pins on the rear of the slide rail with the flange holes
at the rear of the rack.
Step 3.
Push the slide rail so that the pins and the latch snap into place.
Note: The holes on the rack are either be square-shaped or round-shaped.
Figure 18. Left slide rear installation
.
Chapter 3
ThinkAgile CP Setup
33
Advertisement
Table of Contents
