Chapter 3. ThinkAgile CP Setup
This section covers the required steps to install the ThinkAgile CP solution into a rack. This includes installing
the storage block, the compute block, the interconnect switches and the management switch (optional).
Install ThinkAgile CP hardware in a rack
Procedures for installing ThinkAgile CP hardware in a rack.
Figure 7. ThinkAgile CP hardware installed into a rack
Required tools
You need the following tools or equipment to install the ThinkAgile CP solution into a rack:
• Standard flat-blade screwdriver
• #2 Phillips screwdriver
• Electrostatic discharge wrist strap
19
© Copyright Lenovo 2018, 2020