Victron energy MultiPlus 12/3000/120 – 50 Manual page 34

Master
DS-8 na (30A panel)
DS-7 na (30A panel)
DS-6 na (30A panel)
DS-5 AES na
DS-4 Ch. current 3x70A
DS-3 Ch. current 3x70A
DS-2 Master
DS-1 Master
To store the settings after the required values have been set: press the 'Up' button of the master
for 2 seconds (upper button to the right of the DIP switches, see appendix A, position J). The
overload and low-battery LED's will flash to indicate acceptance of the settings.
We recommend making a note of the settings, and filing this information in a safe place.
You can now re-use the DIP switches to apply the remaining settings (step 2).
30
Slave 1
DS-8 na
DS-7 na
DS-6 na
DS-5 na
on DS-4 na
on DS-3 na
off DS-2 Slave 1
on DS-1 Slave 1
Slave 2
DS-8 na
DS-7 na
DS-6 na
DS-5 na
DS-4 na
DS-3 na
off DS-2 Slave 2
off DS-1 Slave 2
off
on