Victron energy MultiPlus 12/3000/120 – 50 Manual page 14

Charger
mains on
Bulk
absorption
Float
Charger
mains on
Bulk
absorption
Float
Battery Charger
Charger
mains on
Bulk
absorption
Float
Charger
mains on
Bulk
absorption
Float
10
inverter
inverter on
on
overload
off
low battery
charger
only
temperature
inverter
inverter on
on
overload
off
low battery
charger
only temperature
inverter
inverter on
on
overload
off
low battery
charger
only
temperature
inverter
inverter on
on
overload
off
low battery
charger
only
temperature
-If the LEDs are flashing
alternately, the battery is nearly
exhausted and the nominal
output is exceeded.
-If "overload" and "low battery"
flash simultaneously, the ripple
voltage on the battery
terminals is too high.
The inverter switched off due
to excess ripple voltage on the
battery terminals.
The AC input voltage is
switched through and the
charger operates in bulk mode.
The mains voltage is switched
through and the charger is on.
The set absorption voltage,
however, has not yet been
reached. (BatterySafe mode)