About The Hardware Installation - Comtech EF Data Memotec NetPerformer SDM-8400 Hardware Installation Manual

NetPerformer SDM-8400 Hardware Installation Guide
3.1

About the Hardware Installation

Hardware installation of the SDM-8400 involves the following steps:
3-2
• "Installing the Unit in a Rack" on page 3-3
• "Powering Up the Unit" on page 3-5
• "Connecting the Console Terminal" on page 3-9
• "Installing the Licensed Software Options" on page 3-11
• "Connecting the LAN Hub" on page 3-11
• Connecting the user equipment to the serial ports
ment" on page 6-3).
None of these procedures require removal of the chassis cover, adjust-
NOTE:
ment of internal parts or installation of optional parts inside the unit.
WARNING:
8400 unit contains no user-serviceable parts. Only a qualified
technician approved by Memotec is authorized to open the
unit.
(Optional)
Do not remove the cover of the SDM-8400. The SDM-
("Connecting the User Equip-
Memotec