Microchip Technology SAM L10 Xplained Pro Getting Started page 8

AN2722
Getting Started With SAM L10/SAM L11 Using ...
4. Connect the kit to the PC using a micro-USB cable (Standard-A to Micro-AB).
When the Xplained Pro MCU kit is connected to the computer for the first time, the operating
system will install the software driver. The driver file supports both 32-bit and 64-bit versions of
® ® ®
Microsoft Windows XP, Windows Vista , Windows 7, Windows 8 and Windows 10.
When the Xplained Pro MCU board is powered, the power LED (green) will glow and Atmel Studio
will auto-detect the specific Xplained Pro MCU and extension boards that might be connected.
Atmel Studio will provide links to relevant information, such as data sheets and kit documentation.
Note: The ATSAML10E16A and ATSAML11E16A devices are programmed and debugged by the
on-board embedded debugger, hence no external programmer or debugger tool is required.
Figure 4-1. Atmel Studio SAM L10/SAM L11 Xplained Pro Introduction
3
© 2016 Atmel Corporation
Application Note
DS00002722A-page 8
©
2018 Microchip Technology Inc.