Related Manuals for SeaView LTB-SF
Summary of Contents for SeaView LTB-SF
- Page 1 INSTALLATION INSTRUCTIONS For Seaview Light Bars: LTB-SF, LTB-SF2 Refer to website for most up to date instructions and videos. WWW.SEAVIEWGLOBAL.COM...
- Page 2 PARTS INCLUDED LTB-SF PARTS X1 Part #SLADAPT3 LTB-SF2 PARTS X1 Part #SVFA3...
- Page 3 TOOLS NEEDED...
- Page 4 Install your light, adapter or box onto the light bar by following the instructions that came with the optional accessory. Insert the four nuts into the adapter plate. This has most likely been done for you. Using a philips head screwdriver screw in the six #12x1”...
- Page 5 1/4-20x1” bolts and nylon shoulder washers. Using a philips head screwdriver screw in the six M6 - 16mm bolts to secure the camera to the adapter plate. (For #LTB-SF only)
- Page 6 Secure the camera or search light assembly to the light bar using the four 1/4-20x1” bolts and nylon shoulder washers. Insert the light bar into the light bar hole located on the back of the Seaview mount.
- Page 7 Using the four 5/16x1” bolts and nylon shoulder washers, secure the light bar by bolting it to the top plate. When using the Seaview #SP1-MOD or #SP2-MOD Spreader Kits use the 5/16x3” bolts.
- Page 8 EUROPEAN OFFICE Tel: 800-655-7922 Tel: +33 4 94 53 27 70 www.seaviewglobal.com www.seaviewprogress.com...
Need help?
Do you have a question about the LTB-SF and is the answer not in the manual?
Questions and answers