Do-Not-Disturb - Disabling the Ringer
Programming and controlling Do-Not-Disturb ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
!/
Start the function by pressing "set" and
the "Do-Not-Disturb" key or
The display shown here appears if
primary and secondary internal phone
numbers are programmed for your
telephone.
S$
Enter the internal phone number(s) to
which the Do-Not-Disturb facility is to
apply and confirm. Example: Prim.
and sec. number
S$
Select whether the Do-Not-Disturb
facility is to be active and/or inactive for
internal and/or external incoming calls,
and confirm.
!
End programming. The setting takes
effect immediately. With the "Do-Not-
Disturb" key you can easily activate or
deactivate the pre-programmed Do-Not-
Disturb facility later.
Activating /deactivating Do-Not-Disturb ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
-%
The receiver is on-hook. Press the "Do-
Not-Disturb" key to activate/deactivate
the programmed Do-Not-Disturb facility.
On - The LED on the key is lit, for
20 seconds the display indicates
"Do-Not-Disturb on".
Off - The LED on the key is off, for
20 seconds the display indicates
"Do-Not-Disturb off".
40
Do-Not-Disturb
.
!12
<
Secondary number
OK Prim. and sec. nb.
>
Primary number
Do-Not-Disturb 11/21
<
ext. off int. on
OK ext. off int. on
>
ext. off int. on
>
ext. off int. on
Do-Not-Disturb 11/21
on
3
1
2
4
1
2
3