AGFEO ST30 Update Procedure

ST30 Update Procedure (as from computer chip 1.1)
Procedure to update your ST30 digital system telephone:
1. The appliance is in standby mode (showing Status/Date/Time).
2. Press the key combination " # 0 * " simultaneously.
3. The appliance switches to Service mode and displays:
ST30 DIGITAL V 1.0
1: ISDN telephone
2: Software update
3: Main program
If you wait too long before pressing "2" the above display will disappear and you will be
returned to the start menu.
Press the left-pointing cursor key to go back to the above display.
The displayed version, here 1.0 or 1.3, is not the version of the telephone but of the update
module in the ST 30. This module is responsible for handling the update.
4. When you key-in 2 the following display appears:
1: Download software list......
2: Select software
3: Wait for software
4: Update software
5. When you key-in 1 the following display appears:
Download list of available
software from update server :
052144709950
Enter the call number of the update server (see above) and confirm with OK.
Note:
The server number to enter is the call number 052144709950.
The update is processed via outside line access by way of class of service 21 (update
module version 1.0) or 59 (update module version 1.3).
This means the outside line access settings (with a leading "0" for outside line seizure
where appropriate) must be followed.
6. When the software list has been successfully downloaded the following display appears:
1: Download software list......
2: Select software
3: Wait for software
4: Update software
or:
Press digit key 2.
Press digit key 1
ST30 DIGITAL V 1.3
1: ISDN telephone
2: Software update
3: Main program