ProMinent Delta Supplementary Instructions Manual page 74

Connection for CANopen bus The "Connection for CANopen bus" is made via a 5P flush-type connector.
ProMinent ®
Fig. 2: CAN connection of metering pumps
2 1
3
4 5
Fig. 3:
Assignments at the pump
(male)
9
5 T-distributor, M12, 5P, CAN
6 Load resistor M 12 coupling
7 Load resistor M 12 connector
8 CAN connecting cable
9 CAN connecting cable
13 CAN-delta e.g. for acid
14 CAN-delta e.g. for alkali
1. Shield
2. CAN V+ (supply voltage –
3. CAN GND (reference potential)
4. CAN H (bus line – dominant high)
5. CAN L (bus line – dominant low)
Fig. 4:
Assignments at the cable
(female)
Functional description
(spur line 1m)
not connected)
19