Safety Instructions; Standards & Regulations - VWR Mini Shaker Instruction Manual

S I
AFETY NSTRUCTIONS
Please read the entire instruction manual before operating the Mini/
Microplate Shaker.
WARNING! DO NOT use the Mini/Microplate Shaker in a hazardous
atmosphere or with hazardous materials for which the unit was
not designed. Also, the user should be aware that the protection
provided by the equipment may be impaired if used with accessories
not provided or recommended by the manufacturer, or used in a
manner not specified by the manufacturer.
Always operate unit on a level surface for best performance and
maximum safety.
DO NOT lift unit by the tray.
CAUTION! To avoid electrical shock, completely cut off power to
the unit by disconnecting the power cord from the unit or unplug
from the wall outlet. Disconnect unit from the power supply prior
to maintenance and servicing.
Spills should be removed promptly. DO NOT immerse the unit for
cleaning.
DO NOT operate the unit if it shows signs of electrical or mechanical
damage.
Earth Ground - Protective Conductor Terminal
Alternating Current
3
S & R
TANDARDS EGULATIONS
VWR International hereby declares under it's sole responsibility that the
construction of this product conforms in accordance with the following
standards:
Safety standards:
IEC 61010-1 Safety requirements for electrical equipment for
measurement, control and laboratory use. Part I:
General Requirements.
IEC 61010-2-010 Part II: Particular requirements for laboratory
equipment for the heating of materials.
IEC 61010-2-051 Part II: Particular requirements for laboratory
equipment for mixing and stirring.
UL Std. No. 61010-1
CSA/CAN C22.2 No. 0-M91
CSA/CAN C22.2 No. 61010-1-04
EMC standards:
FCC-B EN55022-B
EN6100-3-3 EN6100-4-5
EN61000-4-2 EN61000-4-3
EN61000-4-4 EN61000-4-6
EN61000-4-11 EN61326-1 Class A
Associated EU guidelines:
EMC directive 89/336/EEC
LVD directive 73/23/EEC