Driving Off; Cancelling A Remote Start; Remote-Starter Features; Idle Mode (Automatic Transmission) - Fortin FTX 64-2W Manual

DRIVING OFF

When the vehicle is running with the Remote-Starter, enter the vehicle and proceed with the
following steps :
STEP 1
STEP 2

CANCELLING A REMOTE START

See FULL FUNCTIONS, page 6.

REMOTE-STARTER FEATURES

IDLE MODE (AUTOMATIC TRANSMISSION)

Idle Mode allows the vehicle to run without the key in the ignition barrel. For example, if you stop
for a quick errand or delivery, simply allow the vehicle to run while you are gone. The engine will
run until the Remote-Starter runtime expires. Press START any time the vehicle is running with the
Remote-Starter to reset this timer.
To activate Idle Mode (automatic transmission) proceed with the following steps :
STEP 1
STEP 2
The engine will continue to run until either the remote stop function is pressed (see FULL
FUNCTIONS, page 6), the Remote-Starter runtime expires, the parking brake is disengaged,
the brake is pressed, or the hood is opened. If the Remote-Starter is shut down by transmitter it
will automatically go in to Ready Mode (if all the doors are closed).
WARNING :
NEVER LEAVE CHILDREN OR ANIMALS IN A REMOTE-STARTED VEHICLE UNATTENDED.
Insert the key and turn it to the ignition (ON / RUN) position.
WARNING : DO NOT TURN THE KEY TO THE START POSITION WHEN
THE ENGINE IS RUNNING. THIS MAY DAMAGE THE IGNITION SYSTEM
ON SOME VEHICLES.
Step on the brake pedal to disable the Remote-Starter, and put the
vehicle in gear.
With the key in the barrel at the ignition (ON / RUN) position and
the engine running, press the START button until the parking lights
turn on. The remote Green Led flash and a ascending melodie will
sound to confirm.
Turn the key to the OFF position and remove the key from the ignition
barrel. The vehicle will continue to run with the Remote-Starter.
Page 13 / 24