AMQ ACTIV-Pro3 Installation Manual page 8

PHASE 5 | Connecting Worksurface & Power
Step 1
Ensure that the base is properly positioned on the
worksurface. Attach base to the worksurface using
wood screws.
The worksurface should be center
NOTE:
aligned with the cantiliver depth and should
have equal amount of overhang on each end.
1
ACTIV-PRO3 HEIGHT ADJUSTABLE BASE INSTALLATION GUIDE | 8
Facing
Direction
Connect each plugs according to the
drawing. Orientate yourself to the table
assembly by facing as user to identify
left and right motor.
Step 2
Attach the handset to desired location using
handset screws (count x2).
Step 3
Plug in electrical according to the diagram at
right. Attach cable management clips if using.
3
2
amqsolutions.com