AMQ ACTIV-Pro3 Installation Manual page 6

PHASE 3 | Attaching Cantilevers & Feet
Step 1
Plug cantilevers into the stretcher bar ends, lining
up holes. Add screws M6 (special). Tighten using
#4 allen key (or a long extension angle-tipped allen
key to expedite the process).
ACTIV-PRO3 HEIGHT ADJUSTABLE BASE INSTALLATION GUIDE | 6
Step 2
Attach feet to legs with M10 screws.
Trim caps will be attached in Phase 4.
NOTE:
2
2
1
amqsolutions.com