Solaris Issues; Warning Message Might Appear During Startup; Solaris Os Installation Halts During The Installation - Oracle Sun Blade X6240 Product Notes

"Post OS driver update script fails to run" on page 27
■
"SLES OS driver installation takes a long time to complete" on page 28
■
"NIC drivers are not supported by SLES11 OS" on page 28
■
"USB devices are not recognized in RHEL 4.7" on page 28
■
"Windows Issues" on page 29
■
"Windows Autorun does not install drivers" on page 29
■
"Yellow question mark might appear in Windows Device Manager" on page 30
■
"System does not boot from floppy drive image" on page 30
■
For a list of minimum supported operating systems, see
Systems" on page 2.

Solaris Issues

Note - The Sun Blade X6240 is delivered with a preinstalled Solaris OS. This OS is
set by default to be redirected through the serial console connection (ttya). To change
this to local monitor/keyboard, use the GRUB menu at boot time, and select the
VGA option.

Warning message might appear during startup

When using a compact flash device, the following warning message might appear
during Solaris startup:
WARNING: /pci@0,0/pci-ide@4/ide@0 unable to enable write cache
targ=0
It is safe to ignore this message.

Solaris OS installation halts during the installation

Change Request ID: 6848353
When installing the Solaris OS in a system that contains an LSI 1068e B3 HBA, the
installation halts at the "Configuring Devices" screen. This issue does not occur
when using other HBA cards in the system.
This issue is being investigated.
"Supported Operating
Sun Blade X6240 Server Module Product Notes 23