Diagnostics Issues; Hard Disk Error Message In The Sp Event Log; Dimm Spd Data Are Reported Incorrectly In The Fru Data - Oracle Sun Blade X6240 Product Notes

Hard disk error message in the SP event log

The following error message might appear in the SP event log when no hard disk is
installed.
System Firmware Error | Unrecoverable hard-disk controller
failure | Asserted
Workaround:
It is safe to ignore this error message.
DIMM SPD data are reported incorrectly in the
FRU data
Certain DDRII DIMMs are displayed incorrectly in the SP FRU data. For example,
DDRII 800 MHz DIMMs are listed only as 444 MHz DIMMs in the FRU data. This is
a FRU data discrepancy and it does not impact memory and system performance.
Workaround:
This issue is scheduled to be fixed in a future ILOM firmware release.

Diagnostics Issues

This section contains the following:
"Pc-Check Diagnostics Software Issues" on page 21
■
"Hard disk information is unknown" on page 22
■
"Serial port test fails" on page 22
■
"SunVTS Diagnostics Software Issues" on page 22
■
"SunVTS I/O port test fails" on page 22
■
Pc-Check Diagnostics Software Issues
The following issues apply to the Pc-Check diagnostics software.
Sun Blade X6240 Server Module Product Notes 21