Table of Contents
Advertisement
2-2
Installation Procedure
This chapter describes the installation requirements and installation procedure.
2-2-1 Installation requirements
Before installing the XG2000CR, read "For Safe Use of the XG2000CR (P.2)" and comply
with the installation requirements described below.
Space requirements
When installing the XG2000CR, a certain amount of installation space is necessary.
When installing the rack, the indicated space (800mm of both the front and rear of the rack)
should be reserved as a service area.
The following figures indicate examples of a 540mm (W) × 850mm (D) 19-inch rack and a
700mm (W) × 950mm (D) 19 inch rack.
When installing in any other 19-inch rack, refer to the user guide provided with the rack.
[540mm (W) X 850mm (D) 19-inch rack]
(Unit: mm)
Front
Service area
[700mm (W) X 950mm (D) 19-inch rack]
(Unit: mm)
Front
Service area
CAUTION
The XG2000CR may be installed in any rack with an internal depth of between
640mm and 750mm.
(Front)
800
(Front)
800
Rack
Service area
(Top)
(Rear)
800
850
Rack
Service area
(Top)
800
950
Installation Procedure
(Rear)
2
53
Advertisement
Table of Contents
