Table of Contents
Advertisement
For Safe Use of the XG2000CR
This manual contains important information to ensure the safe use of your XG2000CR.
Be sure to thoroughly read and understand its contents before attempting to use the XG2000CR.
After reading, store this manual in a safe place for future reference.
PFU has made every effort to ensure the safety of the user and others, and to prevent property
damage. When using the XG2000CR, follow the instructions given in this manual.
Warning notations
Warnings are included throughout this manual in order to prevent injury to the user and/or
material damage. These are two levels of warnings, both of which are composed of a symbol
and a message describing the issue.
WARNING
CAUTION
Safety Guidelines
For your safety and that of others, please follow these guidelines.
WARNING
Category
Danger of
Never attempt to disassemble, dismantle, upgrade, or recycle the XG2000CR by yourself.
electric shock
Do not place objects on the XG2000CR, as there is a risk of electric shock, fire, and/or damage.
or fire
Do not install the XG2000CR where it will be exposed to direct sunlight, close to a heating device, or in an
environment with much dust and high humidity, as there is a risk of electric shock and fire.
For XG2000CR models with cooling vents, do not block off the vents as these prevent the internal parts of
the XG2000CR from reaching high temperature, and there is a risk of fire.
Do not wrap the running XG2000CR with a cloth. Doing so keeps the heat in, and may cause a fire.
Avoid getting any liquids (such as coffee) or pieces of metal (such as paper clips) into the XG2000CR, as
there is a risk of electric shock and fire. To avoid foreign objects getting into the XG2000CR, never place
objects on it.
Do not put your fingers into the LAN jack, as there is a risk of electric shock.
Do not use the XG2000CR with any voltage other than that specified on the device, as there is a risk of
electric shock and fire.
In case of strange heat, smoke, and/or a strange smell with XG2000CR, immediately disconnect the power
cord from the AC outlet. To make this easy, set the XG2000CR nearby the AC outlet, and keep it within the
reach of the power cord for pulling it easily.
After the power is disconnected, contact the vendor's service department immediately. Continued use of
the XG2000CR may cause an electric shock and fire.
Note that in this case, the state of data in transmission is not guaranteed.
If the power plug or power socket is dirty, clean it with a dry cloth. Continued use may cause a fire.
Do not touch the power plug with wet hands, as there is a risk of electric shock.
Insert the power plug completely into the power socket.
A partially inserted power plug may cause an electric shock, give off smoke, and/or catch fire.
When you remove a power plug from its outlet, be sure to pull the only power plug itself. Pulling on the
power cord itself may expose the cores or break the cord, and cause electric shock or fire.
2
For Safe Use of the XG2000CR
This symbol indicates the possibility of serious or fatal injury if the XG2000CR is not used
properly.
This symbol indicates the possibility of minor or moderate personal injury, as well as dam-
age to the XG2000CR and/or to other users and their property, if the XG2000CR is not
used properly.
This symbol indicates the possibility of serious or fatal injury if the XG2000CR is not used properly.
Warning
Advertisement
Table of Contents
