Simultaneous Synchronization (Ssi) - Keysight U2781A User Manual

2 Features and Functions

Simultaneous Synchronization (SSI)

Simultaneous Synchronization (SSI) provides synchronization between the
modular products within the chassis.
SSI feature should be configured using the bundled Keysight Measurement
Manager (AMM).
SSI allows users to set the modules as MASTER or SLAVE. The MASTER module
sends the SSI signal to the slave modules via the backplane trigger bus (TRIG
[0..7]). SLAVE modules will then receive the signal and begin synchronization with
MASTER module.
There are two SSI configuration modes available — single Master–multiple Slaves
and multiple Masters–multiple Slaves.
– Only ONE master can be assigned for U2300A, U2500A, and U2600A Series.
NOTE
– For more information, refer to the AMM Help File, Chassis Trigger page.
30
Figure 2-4 illustrates an example of SSI. The
Keysight U2781A User's Guide