Viewing The Number Of Current Lamp Strikes (L/St); Viewing The Current Lamp Hours (L/Hr); Viewing The Current Software Version (Ver) - High End Systems Studio Command Series User Manual

Viewing the Number of Current Lamp Strikes (L/ST)

This option is functional for Studio Command 1200/700 fixtures only. To view the number of
times the fixture has attempted to strike the current lamp:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the L/ST option.
4. Press <Enter>. The LED will display the number of times the fixture has struck the
current lamp.
Note: Lamp strikes are automatically reset when the lamp hours are reset
(see Resetting Lamp Hours (L/RS) (Studio Command 1200/700 models
only) on page 40).

Viewing the Current Lamp Hours (L/HR)

This option is functional for Studio Command 1200/700 fixtures only. To view the number of
hours the current lamp has been on:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the L/HR option.
4. Press <Enter>. The LED will display the number of hours the current lamp has
been on.

Viewing the Current Software Version (VER)

To view the current software version:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the VER option.
4. Press <Enter>. The LED will display the fixture's current software version.
Note: The software version is also displayed when you exit the menu system
(see Alphanumeric Display Error Messages on page 63).
Studio Command Series User Manual
CHAPTER 3
The Menu System
41