Changing The Display Output (Dspl); Inverting Led Characters (D/In) - High End Systems Studio Command Series User Manual

CHAPTER 3
The Menu System

Changing the Display Output (DSPL)

You can manually change the appearance of the fixture's alphanumeric LED display, setting the
display on or off, or dimming the display to reduce visibility. If you want to remotely change the
display output (using a DMX console), see Control Parameter on page 53.
To change the display output:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the SET menu. Press <Enter> to select.
3. Scroll to the DSPL menu. Press <Enter> to select.
4. Scroll to ON to set the LED display to normal intensity,
OFF to turn the LED display off, or
or
DIM to reduce the LED display visibility.
or
5. Press <Enter>.

Inverting LED Characters (D/IN)

To invert the orientation of the LED display's alphanumeric characters for viewing when the
fixture is standing upright (i.e., resting on its bottom panel on the floor):
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the SET menu. Press <Enter> to select.
3. Scroll to the D/IN menu. Press <Enter> to select.
4. Scroll to ON to invert the fixture's alphanumeric characters, or
or
OFF to return the fixture's alphanumeric characters to normal orientation.
5. Press <Enter> to store.
28 Studio Command Series User Manual