Performing Self Tests (Self); Placing The Fixture In Setup Mode (S/Up) - High End Systems Studio Command Series User Manual

Table of Contents

Advertisement

CHAPTER 3
The Menu System

Performing Self Tests (SELF)

The following self tests are available:
Construct
ALL
performs all of the self tests listed below
PAN
moves the pan motor from 0° to 540°
TILT
moves the tilt motor from 0° to 240°
divides the cyan color wheel into eight equal sections (positions) and rotates the cyan color
CYAN
wheel from position 1 through 8
divides the magenta color wheel into eight equal sections (positions) and rotates the
MAGN
magenta color wheel from position 1 through 8
divides the yellow color wheel into eight equal sections (positions) and rotates the yellow
YELW
color wheel from position 1 through 8
SHUT
performs strobe functions
DIM
moves the dim wheel from closed to fully open
To see the effects of the self tests, the lamp must be on. If the lamp is off when you run the self
test, the LED will display LAMP to indicate that the lamp is not struck, and the fixture will
attempt to strike the lamp automatically. Self tests run continuously until you until you press
<Menu> to exit the test.To perform a self test:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the TEST menu. Press <Enter> to select.
3. Scroll to the SELF menu. Press <Enter> to select.
4. Scroll to the desired option (listed above).
5. Press <Enter> to start the test. The fixture will perform the selected self test.
6. Press <Menu> to exit the test.

Placing the Fixture in Setup Mode (S/UP)

This menu item is used as part of the service procedure for replacing motor. To place the fixture
in setup mode:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the TEST menu. Press <Enter> to select
3. Scroll to the S/UP option.
4. Press <Enter>. When the LED displays SET NOW, the fixture mechanically homes
the dim flags.
5. After mechanically homing press any button to reset and home the fixture.
34
Self-Test Description
Studio Command Series User Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studio command 700Studio command hStudio command 1200

Table of Contents