Editing Or Creating An On-Board Memory Scene (Edit); Copying An On-Board Memory Scene (Copy) - High End Systems Studio Command Series User Manual

CHAPTER 3
The Menu System

Editing or Creating an On-Board Memory Scene (EDIT)

This menu item allows you to select a scene to edit or create using the fixture's on-board scene
memory. To used this menu option you need to have the user mode for the desired scene
already selected, see Setting the User Type (USER) on page 30.
To select a scene to create or edit:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the PRST menu. Press <Enter> to select.
3. Scroll to the EDIT menu. Press <Enter> to select.
4. Scroll to the scene you want to create or edit (SN01 – SN16).
to
5. Press <Enter> to store.
After a scene is selected, the value of any parameter for that scene can be changed. Step-by-
Step Scene Creation on page 42 contains a detailed example of modifying scene parameters.

Copying an On-Board Memory Scene (COPY)

Use the Copy menu option to copy the settings for a source scene to a destination scene
location. This menu option will copy between any of the 32 scene locations available.
To Copy a Memory Scene from one location to another:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the PRST menu. Press <Enter> to select.
3. Scroll to the COPY menu. Press <Enter> to select.
4. The LED will display FROM. Press <Enter> to select.
5. Scroll to the scene you want to copy from (source scene) for either User A (FA01–
FA16) or user B (FB01–FB16). This example indicates From User A Scene 01
6. Press <Enter>. The LED will display TO. Press <Enter> to select.
7. Scroll to the scene you want to copy to (destination scene) for either User A (TA01
–TA16) or user B (TB01–TB16). This examples indicates To user B Scene 16
8. Press <Enter>. The fixture copies the desired scene to the selected scene location.
When the copy is complete, dONE will appear briefly in the fixture's LED display.
24 Studio Command Series User Manual