Chapter 3: The Menu System; On-Board Programming Capability; Navigating The Menu System - High End Systems Studio Command Series User Manual

Chapter 3:
The Menu System

On-Board Programming Capability

When you use the fixture's on-board menu system to program the Studio Command™ fixture,
you manually assign a value to each of the fixture's available parameters.
The onboard Studio Command menu system allows you to:
• Assign a DMX start channel.
• Access fixture options such as homing the fixture, viewing fixture status, crossloading
software, and performing self tests.
• Create, store, and play scenes from the fixture's on-board memory.
For a full menu map of the Studio Command menu system, see Appendix D: Menu Map.
Note: The same Menu system is used on all models. Some options may not
function for Studio Command H fixtures.

Navigating the Menu System

Access the menu system via the four menu navigation buttons on the fixture's front panel.
Display
LEDs
Use the <Menu> button to
access the menu and return
to previous menu or option
The alphanumeric LED display shows the menu items you select from the menu map. When
accessing fixture options (not preset scenes), the display will flash when a new option is
selected (by pressing the <Up> or <Down> arrow buttons) and stops flashing when a new
option is stored (by pressing the <Enter> button).
Studio Command Series User Manual
Menu navigation buttons. Menu navigation buttons.
Use <UP> and <Down>
arrow buttons to scroll
through menus
and options
Use the <Enter> button to select
and store a menu or option
21