Viewing The Current Logic Board Temperature (Pcb); Viewing The Current Fixture Head Temperature (Head) - High End Systems Studio Command Series User Manual

Viewing the Current Logic Board Temperature (PCB)

This menu option allows you to view the current ambient temperature at the logic board inside
the fixture.
To view the logic board temperature:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the TEMP menu. Press <Enter> to select.
4. Scroll to the PCb option.
5. Press <Enter>. The LED will display the current internal temperature of the
fixture's logic board in degrees centigrade.
6. The maximum temperature for the logic board is 85 C. When maximum temp-
erature is exceeded, the fixture shuts down and the display shows PCB TEMP ERR.
For more information, see Alphanumeric Display Error Messages on page 63.

Viewing the Current Fixture Head Temperature (HEAD)

This menu option lets you view the current ambient temperature inside the fixture head.
To view the fixture's head temperature:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the TEMP menu. Press <Enter> to select.
4. Scroll to the HEAD option.
5. Press <Enter>. The LED will display the current internal temperature of the
fixture's head in degrees centigrade.
Note: The maximum temperature for the fixture head is 100 C. If this maximum
temperature is exceeded, the fixture will shut down and the
alphanumeric display will show HEAD TEMP ERR. For more information,
see Alphanumeric Display Error Messages on page 63.
Studio Command Series User Manual
CHAPTER 3
The Menu System
39