Table of Contents
Advertisement
www.weg.net
4.1 SECURITY SETTINGS
In this tab, password needed to enter Web interface can be changed. For the reason that RS485-ETH-N is a
device that can be accessed from the Internet, it is important to change the default password for security. Desired
password must be written both on the "New Password" and "Confirm New Password" areas. If the two passwords
match and the new password has conformity, a check mark, otherwise a cross sign, will appear on the left side
of the password.
Figura 4.3: Web Interface Security Settings Tab
After the desired configurations are made, settings can be saved by pressing the "Apply" button.
4.2 CONNECTION VIA ETHERNET
In this tab, can be connected via internet with using Gateway Master Software. When the vvprogram is started;
click the "Connect via ethernet" button for enter access informations.
Figura 4.4: Connection via Ethernet
26 | Ethernet / Serial Gateway - RS485-ETH-N
Advertisement
Table of Contents
