Command Functions And Confirmation Of Successful Security System Command Entry; Ademco Security System Commands That May Be Executed - ADEMCO TeleCommand User Manual

Command Functions and Confirmation of
Successful Security System Command Entry
ADEMCO Security System Commands That May Be Performed
Following are typical ADEMCO security system commands that may
be performed once you have obtained access to the security system:
•
Arm AWAY, STAY, MAXIMUM, or INSTANT
•
BYPASS By Zone and Quick BYPASS
•
Disarm OFF
Telephone Key Command Function Entry and Voice Confirmation
Used With ADEMCO Systems:
To:
Disarm
Arm AWAY
Arm STAY
Arm
MAXIMUM
Arm
INSTANT
Specific
Zone
BYPASS
Quick
BYPASS
User code
(add)
User code
(delete)
Example: To arm an ADEMCO system in the STAY mode if your security system
code is 1234, enter [1234] + [3].
✱
If the "Quick-Arm" feature is programmed for your system, you may press the [#] key
in place of your security system code. As an example, to quick arm STAY mode, press
[#] + [3].
Enter:
[4-digit User code] + [1] = OFF
[4-digit User code] + [2] or
✱
[#] + [2] = AWAY
[4-digit User code] + [3] or
✱
[#] + [3] = STAY
[4-digit User code] + [4] or
✱
[#] + [4] = MAXIMUM
[4-digit User code] + [7] or
✱
[#] + [7] = INSTANT
[4-digit User code] + [6] + [2-digit
zone number] = BYPASS
[4-digit User code] + [6] = BYPASS
(QUICK BYPASS of all open zones)
[4-digit User code] + [8] + [new 2 or
3-digit User Number] + [new 4-digit
User code]
[4-digit User code] + [8] + [2 or 3-
digit User Number] + [3 second
pause] + [any key]
Voice Confirmation:
"SYSTEM READY"
"ARMED AWAY"
"ARMED STAY"
"ARMED AWAY INSTANT"
"ARMED STAY INSTANT"
"BYPASS, (descriptor), ZONE #"
"BYPASS, (descriptor), ZONE #"
NONE
To verify addition, try using the
new User code
NONE
To verify deletion, try using the
deleted User code
9