ADEMCO TeleCommand User Manual page 7

Using an Off-Premises Telephone (cont)
If you have an FBII/IntelliSense security system, you should press the [✴] key to
query the security system for it's current status.
2. Enter your 4-digit security system user code. As a safety feature,
if the status of the system does not change during the first 15 key
presses, TeleCommand will disconnect and a 20-minute lockout
will occur.
3. Once the system is accessed successfully, you can then execute
system commands (such as arm, disarm, etc.) using the telephone
keys. See Executing Security System Commands Using the
Telephone.
Accessing the Security System
7