Table of Contents
Advertisement
General Information
TeleCommand permits you to control your security system using a
Multiple Frequency telephone (either on premises or by a call-in when
away). With TeleCommand, you can do the following:
•
Receive synthesized voice reports about your security system
status over the telephone.
•
Arm and disarm the security system and perform most local
keypad functions using the telephone keypad. Voice confirmations
are provided for most function commands entered.
•
Turn certain lights/appliances on and off via the telephone
(Trigger Function).
Type of Telephone Required
The telephone used for telephone access must have multi-frequency
capability.
An off-premises telephone that does not have multi-frequency service
and uses decadic pulses for dialing may not permit switching to multi-
frequency after dialing. This type of telephone cannot be used.
TeleCommand User Code
Your installer has assigned a special 4-digit TeleCommand User Code
to access TeleCommand. TeleCommand access enables you to obtain
current security system status and the ability to command security
system command functions using the telephone keypad.
Introduction
3
Advertisement
Table of Contents
