Fbii Security System Commands That May Be Executed - ADEMCO TeleCommand User Manual

Command Functions and Confirmation of
Successful Security System Command Entry (cont'd)
FBII/IntelliSense Security System Commands That May Be Performed
The following are typical FBII security system commands that may be
performed once you have obtained access to the security system:
•
ARM (all), STAY, INSTANT, or STAY INSTANT
•
BYPASS BY ZONE and QUICK BYPASS
•
DISARM
Telephone Key Command Function Entry and Voice Confirmation
Used With FBII Systems:
To:
Arm (all)
DISARM
Arm STAY
BYPASS
Arm
INSTANT
Arm STAY
INSTANT
Example: To arm an FBII/IntelliSense system to STAY INSTANT
mode, and your security system user code is 1234, enter [✱] + [1] + [✱]
+ [3] + [1234].
If you have an FBII/IntelliSense security system, you should press the [✱] key to
query the security system for it's current status after any telephone key
command entry.
10
Enter:
[4-digit User code]
[4-digit User code]
✱
[ ] + [1] + [4-digit User code]
✱
[ ] + [2] + [4-digit User code]
✱
[ ] + [3] + [4-digit User code]
✱ ✱
[ ] + [1] + [ ] + [3] + [4-digit User
code]
Voice Confirmation:
"ARMED AWAY"
"SYSTEM READY"
"ARMED STAY"
NONE
"ARMED INSTANT"
"ARMED STAY INSTANT"