Table of Contents
Advertisement
Miscellaneous Functions
Using the Trigger Function
The Trigger Function of your system may be configured by the
installer so that a light or other device can be turned on or off from
the telephone keypad using TeleCommand. Check with your installer
to have this feature set up.
To activate the Trigger Function:
1. Access TeleCommand by pressing the # key.
2. Enter your 4-digit TeleCommand User code.
3. Enter [✱] + [4] + [1].
TeleCommand will annunciate the status of the Trigger ON or
OFF.
4. To change the state of the Trigger, enter [✱] + [4] + [1}.
Accessing Other Partitions
You may use TeleCommand to receive status of a Multi-Partition
system using the GoTo Command as described in you Security System
User Guide.
provided. An example of the GoTo Command used with ADEMCO
Security Systems follows:
[4-digit Security System Code] + [✱] + partition number (0,1,2,3).
TeleCommand will remain in the new partition until directed to go to
another partition, or until it automatically returns to the original
partition.
Programming Zone Descriptors
You may program zone descriptors using the premises telephone.
You can play back all zones with attached zone descriptions by
pressing the [✱] or [#] key when prompted to "enter 3 digit zone
number".
16
Annunciation of which partition you are in is not
Advertisement
Table of Contents
