Example Of A Call-In From An Outside Telephone - ADEMCO TeleCommand User Manual

Example of a Call-In From An Outside Telephone

The following is an example of a complete sequence for a call-in from
an outside telephone using an ADEMCO security system to verify
that the security system had been armed AWAY.
Assume that the 4-digit TeleCommand User Code is 1-2-3-4, and that
the system security code is 1–2–3–4.
An answering machine is not connected in the following example.
1. The caller enters the premises telephone number. After a
programmed number of rings, the caller is prompted to enter your
TeleCommand User Code.
2. The caller enters the TeleCommand User Code: [1] + [2] + [3] + [4].
3. TeleCommand annunciates the current status of the security
system. When the Status is annunciated and the caller hears the
words "DISARMED READY TO ARM," the caller knows that the
system is not armed.
4. To arm the system AWAY, the caller enters the 4-digit system
security code, then presses key [2] AWAY.
5. If arming AWAY was successful, the caller will hear the words:
"ARMED AWAY"
6. The caller may press [#] + [✱] + [✱] to end the call.
11