Biddle Comfort Circle Series Manual page 9

M
ANUAL
3
5
7
Version: 1.0 (21-09-2005)
1
2
6
4
8
1.3.5 What's in the box
The unit comes in a box, which contains the following compo-
nents:
• unit 1
• cover 2;
• 2 suspension profiles 3;
• 2 blind plates 4 with fixing screws to adjust the discharge
pattern;
• 1 or 2 valves 5 with servomotors (only for units with
modulating control);
• external drip tray 6 with fixing screws (only for cooling
units).
1.3.6 Components and accessories
1.3.7 Components
The following components are delivered separately but are
always required:
• controller 7;
• control cable 8, available in various lengths.
Accessories
The following accessories are available as options:
• low-limit sensor for change-over detection;
• saddle piece for additional discharge connection;
• ventilation module for coupling to exhaust fan.
1.3.8 Third-party deliverables
The following components are needed for the proper installa-
tion of the ventilation units:
• wall or roof grates;
• air valves;
• air valve servomotors;
• air filters;
• insulated ducts.
These parts are not delivered by Biddle and should be pur-
chased from other suppliers.
I
NTRODUCTION
9