I
NSTALLATION
2.12
Adjusting the discharge pattern
22
The discharge pattern can be adjusted to the room using the
supplied blind plates.
c
Caution:
If use is made of the air connection for an adjoining room,
the two blind plates must be mounted in the two holes on
the side of this connection.
c
Caution:
Do not mount more than two blind plates per unit.
1. Remove the air inlet grille 1.
2. Place the blind plate into the desired hole, and fix it with
the supplied screws 2.
3. Replace the air inlet grille.
2
3
1
C
C
OMFORT
IRCLE