Setting The Timer - Biddle Comfort Circle Series Manual

T
IMER
5.2

Setting the timer

42
?
1. Press the key for three seconds.
n
Note:
The access to the timer menu may be limited through the
controller switch (see section 3.2.3).
2. The display now shows a large
keys, choose between:
- 0 = The unit can still be switched on and off using the
=
key, independently of the timer;
- 1 = The unit can be switched on and off by the timer
only. In the latter case, the
work. If this option is chosen for, the
in the display.
3. To go to the next setting, press the
now shows a large
+
4. Now, using the
- 0 = use no timer or use an external timer;
- 1 = use the timer in the controller.
5. To go to the next setting, press the
ler now displays
starting time on Monday.
6. Set the desired starting time using the
7. To go to the next setting, press the
ler now displays
stopping time on Monday.
If the starting time and the stopping time are the same, the
unit will not switch on.
8. Set the desired stopping time using the
9. Repeat steps 5-7 for the other days (
?
10. By pressing the
stored.
To exit the menu without storing the settings, briefly press
=
the key.
n
Note:
If after setting the timer the
play, you still have to set the current time (section 5.1).
1
. Now, using the
=
key does no longer
@
?
key. The display
2
.
-
and keys, choose between:
?
key. The control-
d1.0 `
as well as the - symbol. This is the
+
and
?
key. The control-
d1.5 !
as well as the - symbol. This is the
+
d2
through to
key for three seconds, the settings are
@
symbol is blinking in the dis-
C C
OMFORT IRCLE
+ -
and
symbol appears
-
keys.
-
and keys.
d7
).