Table of Contents
Advertisement
Safety Instructions
2 Safety Instructions
2.1 General Safety Instructions
The JetWeb Submodule JX6-AD8 is in line with the current state
of the art. The JetWeb Submodule JX6-AD8 complies with the
valid safety regulations and standards. Special emphasis was
given to the safety of the users.
Of course, the user should adhere to the following regulations:
·
·
·
Usage as Agreed Upon
The JetWeb Submodule JX6-AD8 is used for acquiring analog
voltages or currents.
The submodule is supplied with power by the basic module. The
following controllers can be used as basic modules: D-CPU, and
JC 647, as well as the peripheral modules JX6-CON1, or
JX6-CON+. The supply voltage is 24 V DC. This operating voltage
is classified as SELV (Safety Extra Low Voltage). Thus, the
JetWeb Submodule JX6-AD8 is not subject to the EC "Low
Voltage Directive" (LVD).
The JetWeb Submodule JX6-AD8 must be operated within the
limits of the technical data given in chapter 4.
Important !
Usage Other Than Agreed Upon
The JetWeb Submodule JX6-AD8 must not be used in technical
systems which to a high degree have to be fail-safe, e.g.
ropeways and aeroplanes.
If the JetWeb Submodul JX6-AD8 is to be run under surrounding
conditions, which differ from the conditions mentioned in chapter
Technical Data, the manufacturer is to be contacted beforehand.
8
relevant accident prevention regulations;
accepted safety rules;
EU guidelines and other country-specific regulations.
The JetWeb Submodule JX6-AD8 may only be inserted into
the sockets of the basic modules D-CPU and JC 647 or
peripheral modules JX6-CON1, and JX6-CON+ intended for
this purpose.
JetWeb Submodule JX6-AD8
Jetter AG
Advertisement
Table of Contents
