Safety Instructions; Generally Valid Safety Instructions; Usage To The Intended Purpose; Non-Intended Use - Jetter JX3-BN-CAN User Manual

JX3-BN-CAN
1

Safety Instructions

1.1

Generally Valid Safety Instructions

The device complies with the valid safety regulations and standards. Special emphasis
was given to the safety of the users.
Further, the user should adhere to the following regulations:
•
relevant accident prevention regulations;
•
accepted safety rules;
•
EC guidelines and other country-specific regulations.
1.1.1

Usage to the Intended Purpose

Usage to the intended purpose includes operation in accordance with the User Manual.
The JX3-BN-CAN module is for remote connection of JX3 expansion modules to all
controllers of the JetControl series. Up to 8 expansion modules can directly be connected
to the JX3-BN-CAN bus head. By means of a JX3-PS1 module, eight further JX3
modules can be connected.
The supply voltage of the JX3-BN-CAN module is DC 24 V. This operating voltage is
classified as SELV (Safety Extra Low Voltage). The JX3-BN-CAN module is therefore not
subject to the EU Low Voltage Directive.
The JX3-BN-CAN module may only be operated within the limits of the stated data.
The device is used to control machinery, such as conveyors, production machines, and
handling machines.
1.1.2

Non-Intended Use

The device must not be used in technical systems which to a high degree have to be fail-
safe, e.g. ropeways and aeroplanes.
If the device is to be run under ambient conditions which differ from the conditions
mentioned in chapter Operating Conditions (on page 42), the manufacturer is to be
contacted beforehand.
Jetter AG
1 Safety Instructions
9