Avaya INTUITY AUDIX LX Installation Printable Manual page 28

Installation Printable Guide for the INTUITY AUDIX LX
11. Make the following field settings, as shown on the example screen.
Field
New State
Equipment
Equipment Number
Change Immediately?
12. Click Save.
The system displays a confirmation message.
13. From the web-based Administration Main Menu, select:
Diagnostics
Voice Equipment Diagnostics
14. Verify that you have all of the information that you entered and that the state of
the voice card is Inserv.
15. If the state of the voice card is FOOS rather than Inserv, perform the following
steps:
a. From the web-based Administration Main Menu, select Diagnostics, Voice
Equipment Diagnostics, Display.
b. Look for any channels in the state of FOOS. If there are none, continue
onto the next section.
c. If there are channels in the state of FOOS, go to Diagnostics, Voice
Equipment Diagnostics, Diagnose.
d. Complete the Diagnostics page:
Field
Equipment to Diagnose card
Equipment Number
Immediate Diagnosis?
e. Click Diagnose.
f. Wait a few minutes while the system fixes any of the FOOS channels.
g. Click Back, then click Display. All channels should now be Inserv. If one
or more channels remain as FOOS, there is a phone line problem.
Administering Message Core
Installation worksheets or customer input may be required for many of the Message
Core settings.
Overview
file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm
Setting
inserv
card
all
Yes
Display
Setting
all
yes
Page 28 of 42
3/20/2002