Avaya INTUITY AUDIX LX Installation Printable Manual page 6

Installation Printable Guide for the INTUITY AUDIX LX
NOTE: The following applies for INTUITY LX1000 installations in Sweden, Finland,
and Norway only.
The INTUITY LX1000 relies on a ground connection through the main plug with an
earth contact. Because of unreliable earthing concerns in Sweden, Finland and
Norway, the INTUITY LX1000 must be installed by Service Personnel in a restricted
access location. A restricted access location is defined as access that can be gained by
only Service Personnel or Customers who have been instructed about the reasons for
the restricted access and any safety precautions that must be taken. In these cases,
access to the INTUITY LX1000 is gained by the use of a tool (such as a lock and key)
or other means of security.
Weight and space considerations
The following table lists the approximate weight, size, and depth of each system.
Table: System Weight and Space Considerations
Weight Height
29 lb 19 in.
(13 kg) (49 cm)
Add 3 inches (7.6 cm) to accommodate a rear chassis cable support bracket. If
required, add 4 inches (10.2 cm) to accommodate 356B adapter and mounting clip.
The following table lists the approximate weight, size, height, and depth for the
monitor, keyboard, and printer.
Table: Peripheral Weight and Space Considerations
Peripheral Weight
27 lb
Monitor
(12.2 kg)
Keyboard 5 lb
(2.3 kg)
A monitor is not necessarily ordered and shipped for each system. The weight and
space considerations listed are for those shipments that include a Sampo 15-inch
monitor.
file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm
Width
9 in.
(23 cm) with stabilizing feet
Height Width
14 in. 14 in.
(35 cm) (36 cm)
2.5 in. 19 in.
(6.4 cm) (48 cm)
Depth
18 in.
(46 cm)
Depth
15.4 in.
(39 cm)
8 in.
(20.5 cm)
Page 6 of 42
3/20/2002