Avaya INTUITY AUDIX LX Installation Printable Manual page 33

Installation Printable Guide for the INTUITY AUDIX LX
9. If you are using OverLAN switch integration, change the System Parameters
Features form. If you are not using OverLAN, skip 3 steps to the next command.
10. At the AUDIX command prompt, enter change system-parameters features.
Press F7 (NextPage) twice to view page 3 of the form.
11. Make the following field settings, as shown on the example screen, and then
press F3 (Enter).
Field
Transfer Type
Transfer
Restriction
The system displays the message:
System Covering Extension Not Assigned. Press [ENTER] to Confirm.
12. Press F3 (Enter).
13. At the AUDIX command prompt, enter change cos 0.
file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm
Setting
enhanced_cover_0 (or as specified by the customer)
Note: Transfers do not work using the InBand Integration, so do not
enable it.
digits
Note: You can only make this setting with a tsc login. Contact the
support center for assistance.
Page 33 of 42
3/20/2002