Avaya INTUITY AUDIX LX Installation Printable Manual page 10

Installation Printable Guide for the INTUITY AUDIX LX
setting, which is the first one on the list.
8. If there is still no improvement, the customer must supply a different monitor.
Connecting the Keyboard and Mouse
A 6-pin female DIN receptacle is located in the back of the system. The receptacle is
purple. The male plug is provided with the keyboard. Both of the connector assemblies
are keyed to provide proper alignment.
The mouse provided with the INTUITY AUDIX LX system is onboard the keyboard. The
connector for the provided mouse splits off from the keyboard cable. A female DIN
receptacle is located in the back of the system, next to the keyboard receptacle. The
mouse receptacle is green.
If the customer chooses, the customer can provide a standard mouse and plug the
mouse cable into the mouse receptacle.
Connecting the Modem
A serial modem is provided with INTUITY AUDIX LX for remote maintenance. Complete
the following procedure to connect the serial modem to the INTUITY AUDIX LX system.
After you connect the modem, you must install the modem in the INTUITY AUDIX LX
web-based interface.
Note: A USB modem is also available for purchase with the system. If you are using a
USB modem or a customer-supplied serial modem, follow the manufacturer's
instructions to connect the modem to the system. Then use the Install
Modem/Software page to install the INTUITY AUDIX LX modem software.
To connect the supplied serial modem:
1. Verify that dip switches 3, 5, and 8 are in the down position (this should be the
default).
2. Connect the 25-pin end of the provided 25 -pin to 9-pin cable to the modem. A
25-pin extension cable is also provided for use if needed.
3. Connect the 9-pin end of the 25-pin to 9-pin cable to COM2 on the back of the
INTUITY AUDIX LX system.
4. Plug one end of an analog phone cord into the TELCO jack on the modem.
5. Plug the other end of the analog phone cord into an analog telephone jack.
6. Plug the modem's power supply into the modem's power jack and into an
electrical outlet.
7. Turn on the modem's power and then verify that the CS light on the front panel
of the modem is lit.
Once the modem is connected, you must install it in the INTUITY AUDIX LX
system software.
the system for the first time.
file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm
Activate the Modem instructs you to do that after you log in to
Page 10 of 42
3/20/2002