Messages; Creating A Process Picture - Siemens SITOP PSU8200 Manual

7 Power supply system SITOP PSU8600
7.4

Messages

The messages of the SITOP PSU8600 have already been parameterized in the
function block and you do not need to change them.
Figure 7-13
7.5

Creating a process picture

Installing the SITOP library for PCS 7 also copied the block icons and faceplates
for the display of the PSU8600 on the OS. The "Compile OS" function generates
the corresponding block icons in the process picture.
Proceed as follows:
1. Create a new process picture or open an existing one (1) in the folder of the
technological hierarchy in which the CFC plan that you edited before is located.
Figure 7-14
2. Execute the Compile OS function so that the system creates the process
variables, the messages, and the block icon in the OS project.
3. Open the process picture using the WinCC Graphics Designer.
Integration of a SITOP 24V power supply in PCS 7
Entry ID: 10948108, V3.2, 01/2019
1
67