Copying Process Tag Types - Siemens SITOP PSU8200 Manual

7 Power supply system SITOP PSU8600
7.2

Copying process tag types

The SITOP library contains the appropriate function modules and process tag
types for the different PSU8600 variants. Each firmware version has its own blocks
and process tag types. The example uses a PSU8600 with firmware V1.2. You can
download the current firmware in the article "Latest firmware update for the SITOP
PSU8600 power supply system" at the following link:
https://support.industry.siemens.com/cs/ww/en/view/102295547
The function blocks of the used SITOP PSU8600 FW V1.4 with 4 outputs and a
CNX8600 expansion module are configured in the measuring point type
"PSU86m14_CNX86_14". This contains a driver block "Dr86_14", the monitoring
block "PSU86m12" and four blocks "CNX86_14" of the expansion modules. The
blocks have already been correctly interconnected with one another.
The measuring point type "PSU86m14" is configured without extension modules.
Proceed as follows:
1. Open the SITOP library "SITOP_APL_V3_2".
2. Copy the measuring point type "PSU86m14_CNX86_14" (1) into the folder
"Measuring point types" of the master data library.
Figure 7-9
Integration of a SITOP 24V power supply in PCS 7
Entry ID: 10948108, V3.2, 01/2019
1
64