LifeSpan POWER-445 Owner's Manual page 9

STEP 3
1. Hexagon socket button head screws (31), standard Washer (41) and flat washer (39) are used
to secure the seat cushion base (8) and seat cushion (57). Tighten the bolts.
STEP 4
1. Install the seat cushion (57) into the slide tube (4).
2. Insert the limiting shaft (9) into the hole of the sliding tube (4), and use the pan head screws
with bolt (33) to place the foot pad (64)
3. Tight to sliding tube.
When installing, the magnet is oriented to the right-hand side.
9