Configuration - 3Com Wireless LAN Controller WX2200 User Manual

Configuration

Table 7 Planning Techniques to Use
Concern
Do I want to better monitor my
wireless network in terms of
buildings, floors, or coverage
areas?
If RF Planning does not fit your requirements now, you can always use the
RF Planning technique in the future when you have the need, the time,
and the necessary floor plans available. You also can leverage the data in
RF Auto-Tuning and convert these RF measurements to configured
baseline values for planning.
Purpose of this section
(WX switch and MAPs) you will configure in 3WXM.
Why is this important?
the software so that you can plan a configuration to support the services
you require.
You will configure the wireless configuration and AAA security
configuration for each service you provide on your wireless network. You
also create a basic configuration for the WX switch.
Figure 4 Configuration Required for Each Service
Wireless Configuration
- Radio Profile
- Service Profile
- Encryption Choices
If yes, use
RF Planning or RF
Auto-Tuning with
Modelling
: To describe the main areas of the 3Com Network
: To provide you with overview information about
Wireless Service
AAA Security Configuration
- AAA methods
- Rules
- Authentication choices
Configuration 35
If No, use
RF Auto-Tuning