3Com Wireless LAN Controller WX2200 User Manual page 84

84 C 3: C
HAPTER ONFIGURING
Table 12 Creating a Service for VoWIP Access
Task
"Create a Radio Profile"
on page 56
"Create a Service Profile
for Voice" on page 86
"Set Up a VLAN for
VoWIP on WX Switches"
on page 94
W S
IRELESS ERVICES
Path
1 Tool bar option: select
Configuration.
2 Organizer panel: expand the
WX switch.
3 Expand Wireless.
4 Click Radio Profiles.
5 Select Radio Profile in the Task
List.
1 Tool bar option: select
Configuration.
2 Organizer panel: expand the
WX switch.
3 Expand Wireless.
4 Click Wireless Services.
5 Select Voice Service Profile in
the Task List.
1 Tool bar option: select
Configuration.
2 Organizer panel: expand the
WX switch.
3 Expand System.
4 Click VLANs.
5 Select VLAN in the Task List.
Primary Parameters to Configure
From the Create Radio Profile wizard:
Radio profile name: enter a name
For SpectraLink, from the Radio Profile Properties
dialog:
802.11 attributes: change DTIM to 3
After you create the service profile, you can map it
to the radio profile.
After you install the MAPs, you can map their radios
to the radio profile.
Note: The examples in this chapter configure the
radio profile first. However, you also can configure
the radio profile later as part of service profile
configuration.
From the Create Service Profile wizard:
Service profile name: edit name
SSID name: enter name
SSID Type: use Clear (unencrypted)
VLAN Name: enter name
Authentication server: select LOCAL
Radio profile: select one
From the Create VLAN wizard:
VLAN Name: enter name
VLAN ID: select number
IP Address: enter IP Address
Ports: select them and move them to the voice
VLAN
For SpectraLink, from the VLAN Properties dialog:
IGMP: disable
SVP requires IGMP snooping to be disabled.